[Tutorial] Repairing a Nut for a SodaStream Machine

Warning: If the product arrived damaged, please contact us immediately at the following address: contact@repaircoffee.fr. If you have doubts or if any part differs from what was expected, do not hesitate to contact us. We are not affiliated with original brands, and the repair products highlighted are not original brand products.

Easily replace the nut on your SodaStream machine with our quick and simple tutorial, using a replacement nut compatible with Jet, Spirit, Easy, Fizzi, Terra, Duo, Crystal 1.0 & 2.0 models.

Note

Difficulty: Easy

Duration: Less than 20 minutes

Diagnostic

Gas leaks: If you notice gas leaks while using your SodaStream machine, it may indicate a problem with the nut holding the gas bottle in place. A leak may manifest as a hissing sound or low gas level in the bottle despite recent use.
Gasification issues: If your SodaStream machine does not carbonate the water properly, it could be due to a poorly fitted nut. The carbonation process may be ineffective or nonexistent, indicating an issue worth checking.

Prerequisites

A replacement nut
Your SodaStream machine

Repairing the Nut of a SodaStream Machine

Step 1: Safety

Ensure your SodaStream machine is turned off and unplugged for safety reasons. If the machine has been recently used, allow it to cool down before starting.

Step 2: Remove the Rear Cover

Remove the rear cover of the machine to access the area where the gas bottle is located.

Step 3: Remove the Gas Bottle

Remove the gas bottle from the machine for easier access to the area where the nut needs to be replaced.

Step 4: Locate the Nut

Locate the nut to be replaced. It is usually found at the base of the gas bottle connection, holding it in place.

Step 5: Unscrew the Nut

Use a wrench to unscrew the worn nut. Turn the nut counterclockwise until it is fully detached. If the nut is difficult to remove, apply slight pressure, but be careful not to damage other components.

Step 6: Replace the Nut

Take the compatible RepairCoffee replacement nut and align it with the machine’s threading. Screw the nut in place by turning clockwise until it is securely tightened. Make sure it is correctly aligned and well-fastened.

Step 7: Reinsert the Gas Bottle

You can now place the gas bottle back into its original position, then replace the rear cover of your SodaStream.

Step 8: Verify Proper Functionality

Plug your SodaStream machine back in and test it by using the machine to ensure that the replacement nut works properly and securely holds the gas bottle.

Compatibility

The replacement nuts are compatible with the following SodaStream machine models:

SodaStream Crystal 1.0 & 2.0
SodaStream Jet
SodaStream Spirit
SodaStream Easy
SodaStream Crystal
SodaStream Terra
SodaStream Duo
SodaStream Fizzi

Note

To determine which nut to use, compare it with the original one.

FAQ

Is my machine's warranty still valid after replacing the nut?

As explained on the official SodaStream website, the warranty is only void in case of misuse, if you use non-SodaStream CO2 cylinders, or if you carbonate products other than water. Therefore, the warranty should still be valid, though we cannot guarantee it.

I don’t know my SodaStream machine’s model.

If you don’t know your SodaStream model, we invite you to refer to the information provided on the official SodaStream website.

How to buy an official SodaStream replacement nut?

Unfortunately, SodaStream does not provide replacement nuts, so you will need to find non-branded alternatives. We recommend buying from our Amazon store.

How to contact us?

If you need further information, contact us at the following address: contact@repaircoffee.fr.