[Tutorial] Repairing the Push Button of a SodaStream

Warning: If the product arrived damaged, please contact us immediately at the following address: contact@repaircoffee.fr. If you have doubts or if any part differs from what was expected, do not hesitate to contact us. We are not affiliated with original brands, and the repair products highlighted are not original brand products.

Easily replace the push button on your SodaStream machine with our quick and simple tutorial, using a replacement button compatible with Fizzi, Easy, and Spirit models.

Note

Difficulty: Easy

Duration: Less than 15 minutes

Diagnostic

Unable to use the machine: If you find that your SodaStream machine does not respond when you press the button, it could be due to a damaged push button. A damaged button can prevent the machine from activating, making it impossible to use its features.
Poor carbonation: If your SodaStream machine does not carbonate the water properly, a defective push button could be the cause. A damaged button might not allow proper CO2 distribution, leading to ineffective or nonexistent carbonation.

Prerequisites

A RepairCoffee replacement push button
Your SodaStream machine

Repairing the Push Button of a SodaStream

Step 1: Safety

Start by turning off and unplugging your SodaStream machine for safety reasons. Make sure the device is completely stopped before beginning.

Step 2: Remove the Rear Cover

Remove the rear cover of the machine to access the area where the gas bottle is located. You should see the back of the push button to be replaced.

Step 3: Remove the Push Button

Gently remove the push button by grabbing its back. Don’t hesitate to press the SodaStream button lightly if it helps.

Attention

A spring may be present underneath the push button; if so, you’ll need to reposition it the same way after replacing the push button.

Step 4: Replace the Push Button

Insert the new RepairCoffee push button. You can then reattach the rear cover.

Step 5: Verify Proper Functionality

Before reconnecting and using your SodaStream, press the push button and check if the mechanism works correctly.

Compatibility

The replacement push button is compatible with the following SodaStream machine models:

SodaStream Fizzi
SodaStream Easy
SodaStream Spirit

FAQ

Is my machine's warranty still valid after replacing the push button?

As explained on the official SodaStream website, the warranty is only void in case of misuse, if you use non-SodaStream CO2 cylinders, or if you carbonate products other than water. Therefore, the warranty should still be valid, though we cannot guarantee it.

I don’t know my SodaStream machine’s model.

If you don’t know your SodaStream model, we invite you to refer to the information provided on the official SodaStream website.

How to buy an official SodaStream replacement push button?

Unfortunately, SodaStream does not provide replacement push buttons, so you will need to find non-branded alternatives. We recommend buying from our Amazon store.

How to contact us?

If you need further information, contact us at the following address: contact@repaircoffee.fr.