[Tutorial] Repairing the star gasket of a Bestway Flowclear Filtration System

Warning: If the product arrived damaged, please contact us immediately at contact@repaircoffee.fr. If you have any doubts or if a part is different from what was expected, do not hesitate to reach out. We are not affiliated with the original brands, and the repair products featured are not original brand products.

Easily replace the star gasket in your Bestway Flowclear filtration system with our quick and simple tutorial, using a star gasket specially designed for this model.

Note

Difficulty: Easy

Duration: Less than 20 minutes

Diagnostic

Water leaks around the filtration system: If you notice water leaks around your Bestway Flowclear filtration pump, it could be due to a damaged or improperly positioned gasket. A worn or cracked gasket can no longer provide an effective seal, leading to leaks and potentially affecting the overall performance of the pump.
Decreased filtration pressure: If you observe a drop in filtration pressure, it may indicate that the gasket in the filtration system is deformed or worn out. A deformed gasket may not properly seal the connections, which reduces the efficiency of the filtration system and can result in insufficient water circulation through the pump.

Prerequisites

A RepairCoffee star gasket
A screwdriver

Repairing a Bestway Flowclear Pump Gasket

Step 1: Safety

Start by turning off the filtration system and unplugging the power supply for safety. Make sure the system is fully turned off before beginning.

Step 2: Open the Pump Cover

Open the Bestway Flowclear filtration system cover by unscrewing the screws or clips holding it in place. Remove the cover to access the internal components.

Step 3: Locate the Gasket

Locate the Bestway Flowclear star gasket to be replaced. It is usually found in the center of the filtration system, around the main shaft.

Step 4: Remove the Worn Gasket

Remove the worn star gasket by sliding it out of place. If it is difficult to remove, use a small flathead screwdriver to gently lift it.

Step 5: Clean the Area

Clean the gasket area with a clean cloth to remove any dirt or debris that might prevent a proper seal with the new gasket.

Step 6: Install the New RepairCoffee Star Gasket

Take the new RepairCoffee star gasket and gently place it around the main shaft. Ensure it is properly aligned and seated.

Step 7: Replace the Pump Cover

Replace the filtration system cover and secure it by screwing the screws or reattaching the clips. Make sure the cover is tightly secured to avoid any leaks.

Step 8: Verify Functionality

Plug the filtration system back in and turn it on. Check that the new star gasket is working correctly and there are no leaks.

Compatibility

The replacement star gasket is compatible only with Bestway Flowclear filtration systems.

FAQ

How can I ensure that my RepairCoffee star gasket fits my Bestway Flowclear pump correctly?

If your pump is indeed a Bestway Flowclear, our RepairCoffee star gasket is specifically designed for this model. It may work with other pumps and filtration systems, but we cannot guarantee it.

How can I buy an official star gasket for my Bestway Flowclear pump?

It can sometimes be difficult to find official gaskets for a specific model. That’s why we offer an alternative solution, recommending you to purchase from our Amazon store.

How can I contact you?

For additional information, feel free to reach out at contact@repaircoffee.fr.